Tech-Protect Glass Uv+ Xiaomi Redmi Note 15 Pro+ Plus 5G Clear [2 PACK]

Tech-Protect Glass UV+ It is tempered glass with a UV application. The UV light curing technology ensures that the glass perfectly adheres to the screen, maintaining full transparency and touch sensitivity. In the package, you receive two pieces of glass and a UV lamp, so your device will be protected from day one.

The glass achieves a hardness of 9H on the Mohs scale, which means effective protection against keys, coins, and other items we carry in our pockets. The thickness of 0.3 mm maintains the slim profile of your smartphone and does not affect the responsiveness of the touchscreen. The material absorbs impact energy, protecting the display from cracks even when falling from a height. Thanks to UV technology, the glass also covers the curved edges of the screen, eliminating the formation of air bubbles.

The oleophobic coating reduces the visibility of fingerprints and makes it easier to clean the surface. The image remains crystal clear with faithful color reproduction, and the smooth glass surface maintains gesture precision and scrolling fluidity. After installation, remember to re-register your fingerprints so that the screen reader functions optimally with the new protective layer.

* We do not recommend using 3D glass without any case.

** We do not recommend using glass if the case overlaps too much with the edges of the screen, as there is a risk of it being pried off.

*** The functionality of the fingerprint reader in the screen may be slightly disrupted in the case of an installed overlay in the form of a film or glass. The fingerprint reader is not fully optimized for additional coatings.

• 100% Original
• Packed in the original packaging.
• Application with UV lamp
• Glass hardness 9H
• A thickness of only 0.3 mm
• Oleophobic coating reducing fingerprints
• Full coverage of curved edges

2 × Tempered glass Tech-Protect Glass UV+

1 × UV Lamp

2 × Installation kit

1. Start the installation in the bathroom right after the bath - the steam will absorb all the dust from the atmosphere, and it won't interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, and then polish it to a shine with a dry cloth.
3. Use the tape from the set to cover the speaker.
4. Connect the UV lamp using a Type-C cable to a power source.
5. Pour the liquid directly in the center of the device.
6. Install the glass as evenly as you can; you can also adjust this stage before curing the surface when the liquid is on the screen along with the glass.
7. If an air bubble appears, use a bank card and gently push it out beyond the edge of the glass; this should be done before curing.
8. Using a UV lamp, cure the glass along the center in five places for 15 seconds each, and then around the edge for 10 seconds.
9. Clean the phone from the remnants of hardened glue.
10. If your device has a fingerprint reader under the screen, remember to remove and re-add your fingerprints after installing the screen protector.
11. Enjoy a job well done!