Glastify UVTG+ Samsung Galaxy S23 Ultra Clear [2 PACK]

The GlasTIFY UVTG+ tempered glass is made from lightweight and milled AGC glass with a thickness of just 0.28mm.
During the production process, it was tempered at 420°C, which gives it a surface hardness of 9H, ensuring the highest level of protection during everyday use and absorbing impact force.

UVTG+ is bonded using a liquid substance over the entire surface of the screen and then cured with a UV lamp. This combination achieves a perfect effect of smoothness, clarity, and responsiveness on a curved screen.
The glass is precisely made and fully functional. Remember that you receive 2 pieces of glass in the set.

The GlasTIFY brand of glass does not need further introduction, as it is absolutely "TOP" in the category of screen protection.

* The glass is compatible with most cases available on the market, the die-cut is "Case Friendly".
** Remember to remove and re-add your fingerprints after installing the glass - if applicable.

CHECK HOW EASY THE INSTALLATION IS: https://youtu.be/bKRgFJ4Rg_w

INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after a bath - the steam will absorb all the dust from the atmosphere and it won't interfere with your installation.
2) Level the phone so that it lies flat, otherwise the adhesive will flow off the phone and the installation will fail.
Remember to cover the top speaker with a sticker from the set.
3) Use an alcohol-soaked wipe to thoroughly clean the surface, and then polish with a dry cloth.
4) Get rid of dust with a sticker.
5) Unscrew the main cap (the adhesive will not flow) and place the tube in the center of the screen, then gently unscrew the top cap (the adhesive will start to flow).
6) Remove the protective layer and place the glass on the display; if you lay the glass crooked, you can freely slide it as long as the glass is floating on the screen.
Wait a few seconds for the adhesive to fill the entire surface of the glass.
7) Using the UV lamp, cure the glass in each zone for 10 seconds.
8) Clean the phone of adhesive residues and re-add fingerprints.

PRODUCT FEATURES:
- 100% Original
- Packaged in original packaging
- Hardness 9H
- Customized for a curved screen
- Milled 2.5D edges pleasant to the touch
- Hydrophobic layer
- Oleophobic layer
- Perfectly transparent
- Does not affect touch sensitivity
- Dimensions: 160x75mm

THE SET INCLUDES:
2 x GlasTIFY UVTG+ Glass
1 x Installation kit